Replacing large oil lines

[TheChad]

Hey all,

Since my ski's are new to me, I am in the process of replacing all the lines/tubing.. I already replaced the fuel line with 1/4" Marine Grade rubber fuel line, now I was going to replace the large oil lines.

They look like standard vinyl tubing, are they? I know the one that goes to the oil pump has a spring thingy inside of it, so that one I'll probably have to order the factory line..

Also the oil filter, is it just a generic oil filter I could buy at an auto parts store? or will I need to order the factory one?


Thanks,

-TheChad

 

[kustomkarl]

You could get along with a after market filter.

Karl

 

[RFoster130]

The sea doo filters are only like 8 bucks. You can order them on the parts link here.

 

[TheChad]

Cool, I'll order a filter then..

What about the tubing?

Thanks,

-TheChad

 

[kustomkarl]

Be sure the hose id able to work with oil. Some cheap lines won't work with oil or fuel.

Karl

 

[RFoster130]

I just looked, they are actually 12 bucks for each of yours. The hose is totally over priced. Just take it to your local auto parts store and match it up. You might even find it at home depot.

 

[RFoster130]

Karl is correct. They sell oil resistant clear hose. You can find it at places like motorcycle shops. I have seen 25 ft rolls for like 10 bucks. Much cheaper than the sea doo specific lines already cut.