Refurbishing tips on 1996 xp and 1996 spx

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

MikeandDykes

New Member
I just recently got a 96xp and a 96 spx and am looking to refurbish both of them. They look ok and I got them for $400. Any tips on what I should do to refurbish the skis and what process I should use. I should also mention that these are my first ever skis.
 
A lot of good deals going around recently!

Did you get the two skis and the trailer in the picture for $400?
 
Here you go man! Tell me what you think! I'm not that knowledgeable about these things. Like I said these are my first skis.
 

Attachments

  • IMAG0064.jpg
    IMAG0064.jpg
    859.4 KB · Views: 15
  • IMAG0065.jpg
    IMAG0065.jpg
    779.2 KB · Views: 10
Those were the xp. And these ones are the spx
 

Attachments

  • IMAG0067.jpg
    IMAG0067.jpg
    719 KB · Views: 8
  • IMAG0068.jpg
    IMAG0068.jpg
    734.2 KB · Views: 16
  • IMAG0066.jpg
    IMAG0066.jpg
    733.2 KB · Views: 9
Ridiculous deal..were they on CL? The SPX is a 95....not a 96.

There are INSANELY good threads done by Jetskigoodies in the two stroke section regarding restoration of the hull, and many threads regarding the general maintenance.

I carry many parts needed for maintenance.

Welcome to the best Seadoo forum in the world!! If I can help with anything let me know.
 
Status
Not open for further replies.
Back
Top