problems with a 2006 seadoo speedster 200

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

JDMoney

New Member
I was hoping you could help me or point me in the right direction. Ive never had a problem with my boat till the other day. i put it in the water and noticed that it had a vibration to it. after a bit it seemed to clear up. i went to get on it and couldn't get the left motor to go past 2000 rpm. the right motor was as crisp as its always been. didnt want to run it so i immediately loaded it up to keep from stressing out the good motor and messing up the other motor more than it was. i did notice that when i put it on the trailer i fired it up really quickly and the left motor would then gradually get to 5000 rpm (out of water) put it was a little slow getting there. The right of course is really responsive and seems to be working as good as day one. Any help would be appreciated. Wanted to check the plugs but i could find them. :( were are they??

I appreciate any help.

Joe Maley
956-873-2001

Trux Techz Performance
Offroad and Suspension Specialist
Harlingen, Texas 78550
truxtechz@yahoo.com
 
anyone have any ideas.... the boat was running perfect before i parked it for a month to re-do the leather, install hydro turf and do a full wrap on it. For the life of me i just cant figure what could of gone wrong.
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top