• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

oil pump off now what

Status
Not open for further replies.

buzzman

New Member
97 GS capped oil pump an removed
how does rotary valve get oil now?/
do i need to change carb settings?
 
You may want to richen up the adjustment screws just a touch. Run a line from the front of the valve outlet to the back inlet. I put a T in mine so I could add any if it ever goes down. Fill it with oil and done.

People might hate the oil pump delete, but I never look back.. As you know, you MUST PREMIX YOUR FUEL AT LEAST 50:1 NOW. If you have RAVE make sure its synthetic.
 
You may want to richen up the adjustment screws just a touch. Run a line from the front of the valve outlet to the back inlet. I put a T in mine so I could add any if it ever goes down. Fill it with oil and done.

People might hate the oil pump delete, but I never look back.. As you know, you MUST PREMIX YOUR FUEL AT LEAST 50:1 NOW. If you have RAVE make sure its synthetic.

no.


Do NOT richen up the carbs. leave the settings stock, and mix at 40:1.


Do NOT put a T in the hose. leave the tank in the hull with about a half gallon in it. If you hook the hoses together, and you loose a seal, that oil will get sucked into the engine, and you will kill the rotary valve gears very quick.
 
Status
Not open for further replies.
Back
Top