Oil Advance Line - what is it?

[zero visual]

Alright I bought a pair of 95 spi's and I had noticed a line that split on one of them.. I looked it up in the manual and from what I can tell its the Oil Advance Line. Can anyone tell me what that does? I had tried to research it but just to many different variables came up. Is it needed? if not should I throw some oil in the gas to be safe? I do plan on replacing it, just want to know what it does.

 

[zero visual]

damit... after looking at the manual a little closer... I definitely think its an oil injection line! I really really hope i didn't mess up my engine. I took it out a twice and noticed the engine would stick for a second then go.

 

[Dr Honda]

Replace all the oil hoses, and the filter. Then bleed the system. This is exactly why seadoo's die. Lack of maintenance to the oil system. BUT... sorry that it happened.

I see you are in Pitt. If you need a hand... just yell. (I'm by Irwin)

 

[zero visual]

Replace all the oil hoses, and the filter. Then bleed the system. This is exactly why seadoo's die. Lack of maintenance to the oil system. BUT... sorry that it happened.

I see you are in Pitt. If you need a hand... just yell. (I'm by Irwin)

i actually might! also do you know the sizes i need for the lines?

 

[zero visual]

duplicate post

 

[Dr Honda]

The 2 small hoses are 3/16" or 1/8". I use Tygon hose as the replacement. It can be found at any hobby shop. (Just don't buy Silicon hose. It won't take the oil)