lamajama
Well-Known Member
I was changing the plugs on my 04 GTX SC and noticed that the front 2 cylinder plugs had a liberal coating of oil on the
threads of the 2 plugs. The oil was not burned at all and looked rather clean. The 3rd cylinder was dry as they normally
are... The seadoo is running just fine and the oil level is right in the middle where it should be.
I was planning on changing the oil but need to get it warmed up good and don't want to run it on the hose for even over a
minute despite some instructions saying to run it on the hose for 5 min and then doing the oil change so I'm going to try doing it
after a run.
Anyway, in regards to the oil on the plug what does everybody think?
threads of the 2 plugs. The oil was not burned at all and looked rather clean. The 3rd cylinder was dry as they normally
are... The seadoo is running just fine and the oil level is right in the middle where it should be.
I was planning on changing the oil but need to get it warmed up good and don't want to run it on the hose for even over a
minute despite some instructions saying to run it on the hose for 5 min and then doing the oil change so I'm going to try doing it
after a run.
Anyway, in regards to the oil on the plug what does everybody think?