No spark on 96 xp 787

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.
Just swap the CDI module out since you're still getting 2 beeps from the MPEM. The 96' XP should be a 2 piece MPEM/CDI in the grey box.
 
Okay guys I have fixed the problem when I got the whole box off eBay I went ahead and just replace the CDI once I replace the CDI the Seadoo started right up thank you everyone for posting and commenting I really appreciate it
 
Okay guys I have fixed the problem when I got the whole box off eBay I went ahead and just replace the CDI once I replace the CDI the Seadoo started right up thank you everyone for posting and commenting I really appreciate it
Thank You for reporting back and stating what the solution/fix was. This will be helpful to others that may have the same or a similar issue. Most folks just do not report back to say if it was fixed or not.
 
Status
Not open for further replies.
Back
Top