I have a 2000 GTX Millennium
When I plug the DESS key in I do not get a beep.
Gauges don’t turn on if I hold down the start button or press it 5x.
The beeper does work if I hook power directly to it.
Power is going to the MPEM
If I remove any of the harnesses from the MPEM I hear a slight beep from the MPEM when the harnesses are plugged back in. There is 12 volts going to the MPEM.
The DESS post is working when I check continuity.
I have followed wiring harnesses and cannot find any problems.
It started after I had a low battery and needed to jump it and it started.
I replaced the battery then nothing worked. Fuses in the MPEM are good.
Are there any other fuses on the ski that I am missing.
Starter works when I jump the solenoid.
Thanks in advance for any help.
When I plug the DESS key in I do not get a beep.
Gauges don’t turn on if I hold down the start button or press it 5x.
The beeper does work if I hook power directly to it.
Power is going to the MPEM
If I remove any of the harnesses from the MPEM I hear a slight beep from the MPEM when the harnesses are plugged back in. There is 12 volts going to the MPEM.
The DESS post is working when I check continuity.
I have followed wiring harnesses and cannot find any problems.
It started after I had a low battery and needed to jump it and it started.
I replaced the battery then nothing worked. Fuses in the MPEM are good.
Are there any other fuses on the ski that I am missing.
Starter works when I jump the solenoid.
Thanks in advance for any help.