fancherfast
New Member
First of all I just want to say thanks to all the guys on this forum for all the help that I have read. I traded a running 98 GTS Seadoo for a 95 Speedster that was not running. Stud was broke in the exhaust manifold. Got the Manifold fixed and started going over the boat to make sure all the maintenance was up to par. It was not. Ended up needing to replace the bearings on the drive shaft, servicing one jet pump with new oil and replacing one wear ring and impeller and replacing the pump oil on the other jet pump. I had no idea what i was getting into, but when i got the boat all the parts needed to perform these changes were included in a box. I have been getting on here and reading past post and all the information that is available on this site, has helped me get boat is good shape. Hoping all goes well and taking her for a trial run this weekend. Just wanted to give props for all the good information. Thanks
