I have a 2002 seadoo rxdi that was just rebuilt.
It idled fine on a trailer with a hose running to it but I took it out today for the first time to break in the motor.
low rpms seem ok but as soon as I steadily give it throttle but not full throttle, it bogs out and dies.
It will start right up again fine and idle but as soon as I hold the throttle down about 50% or more it eventually bogs out. It doesn't sputter or choke but it just seems to almost run out of fuel to the rail.
I get it back and put it on the trailer but in the water so water is pumping out the front hose and then I get a "HI TEMP" warning on the gauge....
It idled fine on a trailer with a hose running to it but I took it out today for the first time to break in the motor.
low rpms seem ok but as soon as I steadily give it throttle but not full throttle, it bogs out and dies.
It will start right up again fine and idle but as soon as I hold the throttle down about 50% or more it eventually bogs out. It doesn't sputter or choke but it just seems to almost run out of fuel to the rail.
I get it back and put it on the trailer but in the water so water is pumping out the front hose and then I get a "HI TEMP" warning on the gauge....
