Need advice on performance parts

[Joem91]

I wanted to get some advice on what mods people recommend for my 94 seadoo sp. Like what intake grate do people like, a possible racing exhaust, k&n flame arrestor, extend the ride plate, anything! Please help me out the only thing im not happy about is how bad my SP bounces on the water other than that just want to make it ride awesome! THANKS

 

[Dr Honda]

What are trying to do?

With external (handling) mods... there is always a give and take.

The best "power" mod is a pipe. I don't like aftermarket flame arrestors, since they don't do much, and cause tuning issues.

 

[Joem91]

I want to fix the bouncing that occurs when using 3/4 throttle and definitely get some more power out of it.

 

[Dr Honda]

OK. Since you have an "x4" hull... you can put trim tabs on the back. On my XP... I put on larger tabs, and shimmed them down about 3 degrees. I also installed a UMI top loader intake grate. With those 2 mods... it made a world of difference. It will run flat at full throttle.

 

[Joem91]

That's exactly what I needed to hear and see! Thanks Dr Honda however i dont have screw holes for the trim tabs??

 

[Joem91]

i tried to post a pic but i cant figure it out if you want the pic give me your email

 

[Dr Honda]

That's becasue your desktop is not a valid internet source. You can get a free Photobucket account that will allow you to load pictures to a website. (That's what I use)

As far as I know... the holes are factory. You just partly drill threw the hull, and use large self tapping screws. If you check ebay... you can find the smaller, factory tabs.

I have the install instructions if you need them.

 

[Joem91]

Where did you purchase the trim tabs???

 

[Joem91]

Heres the pic: