SEA-MONSTER
Active Member
I am going to attempt to rebuild my carbs myself, is there a link to follow with instruction + step by step, please help! (twin carbs 96 GTX 787)
Thank you,
John
Thank you,
John
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Need a link......
- Thread starter SEA-MONSTER
- Start date
- Status
Mikuni carbs
Use only Mikuni OEM carb kits and replace the needles & seats.
Lots of links, and posts, and in the How-to section. Snipes corner ect. A POP-OFF tester tool is Necessary.
http://www.seadoosource.com/mikunitests.html
Insure you repaint the carbs after re-assembly & PO testing, and syncronize the butterfly's.
1996 GTX 787 270500284 270500285 BN-40I (SB) MAIN-142.5 PILOT-70 1.5 270500267 23 - 43 LOW- 1 HIGH-
Use only Mikuni OEM carb kits and replace the needles & seats.
Lots of links, and posts, and in the How-to section. Snipes corner ect. A POP-OFF tester tool is Necessary.
http://www.seadoosource.com/mikunitests.html
Insure you repaint the carbs after re-assembly & PO testing, and syncronize the butterfly's.
1996 GTX 787 270500284 270500285 BN-40I (SB) MAIN-142.5 PILOT-70 1.5 270500267 23 - 43 LOW- 1 HIGH-
Last edited by a moderator:
kobiskytony
New Member
Go to tech tips on SBT.com or SBTforums complete rebuild info for Keihn & mikuni carbs.
- Status
Similar threads
