Machine ran fine for the last five days w/o having to rebuild carb. Used a stabil like additive made by briggs and stration for 2 cycles, it's starting fine.
Today won't start unless I give full throttle and i noticed in my new fuel lines there's an air pocket/bubble. This shouldn't be there...right? Possibly one of my connections are loose to allow air in? Also when I cut the new lines I added a little bit to the length vs. original, Would too much slack in the lines cause a problem for good fuel flow?
Today won't start unless I give full throttle and i noticed in my new fuel lines there's an air pocket/bubble. This shouldn't be there...right? Possibly one of my connections are loose to allow air in? Also when I cut the new lines I added a little bit to the length vs. original, Would too much slack in the lines cause a problem for good fuel flow?


