Help with part numbers for o-rings 240 EFI head installation

[Mcgann454]

I just got my rebuilt head back and it came with the gasket but not the 0-rings to install the head on the pump. The install manual calls for a Drive shaft O-ring and a Drive housing cover O-ring. The parts look-up sites on the web don't use that verbage. I also can't seem to find any of the "Special Lubricant 101". Does anyone have part numbers they could help me with? Serial number is OE384691 and it is a Sportjet 240 EFI.
Also, should I use any kind of RTV type of product on the gasket?
Thanks in advance.
Mike

 

[Dr Honda]

The rubber O-rings should have come with the base gasket.

But... it should be #25 and 26 here...

http://www.boats.net/parts/search/M...pansion Chamber And Adapter Plates/parts.html


No... do not put any sealant on the gasket. It will have a bead of RTV on it, and it will seal dry, as long as your mounting plates are clean and smooth.

The lube is just a synth grease that you put on the driveshaft.

 

[Mcgann454]

The rubber O-rings should have come with the base gasket.

But... it should be #25 and 26 here...

http://www.boats.net/parts/search/M...pansion Chamber And Adapter Plates/parts.html


No... do not put any sealant on the gasket. It will have a bead of RTV on it, and it will seal dry, as long as your mounting plates are clean and smooth.

The lube is just a synth grease that you put on the driveshaft.

Thank you for all of the help!!!