• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

harness pins

Status
Not open for further replies.

marlboroa

New Member
since my hull swap is out im going to swap most of the parts. to swap the hood i need to remove the wires from the connector. my local auto parts store does not have a pin extractor. Is there any where else that sells them or am i going to have to order one off the internet?
 
If you have a good electronics shop local to you... they will have a pin tool. Otherwise, you will have to order it.
 
I got mine off ebay for like 5 bucks. Auto zone here has them. I would call around to other auto parts stores or radio shack.
 
Status
Not open for further replies.
Back
Top