T tommy New Member Nov 9, 2009 #1 My ski is flashing up maint is there a problem with the ski or does it just need a service if so how do i re set it ????? seadoo 1996 gsx
My ski is flashing up maint is there a problem with the ski or does it just need a service if so how do i re set it ????? seadoo 1996 gsx
T timmyboy76 New Member Nov 9, 2009 #2 how the ski performing? Check the oil level, if all good, run it, make sure the pipe/exhaust/head aint "hot to touch", and if all good, disconnect the battery, let sit, so it loses memory, then re-hook up cables. See if that works.
how the ski performing? Check the oil level, if all good, run it, make sure the pipe/exhaust/head aint "hot to touch", and if all good, disconnect the battery, let sit, so it loses memory, then re-hook up cables. See if that works.
ski-d00 Well-Known Member Nov 9, 2009 #3 No need to disconnect anything. When the watercraft is due for a maintenance inspection, the message “MAINT” will blink. This is at set hour intervals like 25, 50, 75, etc. To clear the “MAINT” message, press the SET button for 2 seconds during the message blinking. Basically, another worthless SeaDoo feature.
No need to disconnect anything. When the watercraft is due for a maintenance inspection, the message “MAINT” will blink. This is at set hour intervals like 25, 50, 75, etc. To clear the “MAINT” message, press the SET button for 2 seconds during the message blinking. Basically, another worthless SeaDoo feature.