robman66
New Member
I have read a couple threads regarding changing the gear/stator oil. Just looking for a bit more clarification.
I know there are the drain and vent plugs, next to the intake grate. Maybe someone can help me with the proper procedure.
Obviously the drain plug is removed to drain the old oil. I read something about using the vent hole to fill it?
So once the old oil is completely drained, re-install the drain plug and start to fill through the vent plug? Until it overflows?
And then just re-install the vent plug and call it done?
I am totally lost when it comes to the stator. I don't even know what to look at, or how to begin.
Also, how much gear oil do I need to buy? Is 1 quart enough?
Any help would be greatly appreciated.
Thanks
Rob
I know there are the drain and vent plugs, next to the intake grate. Maybe someone can help me with the proper procedure.
Obviously the drain plug is removed to drain the old oil. I read something about using the vent hole to fill it?
So once the old oil is completely drained, re-install the drain plug and start to fill through the vent plug? Until it overflows?
And then just re-install the vent plug and call it done?
I am totally lost when it comes to the stator. I don't even know what to look at, or how to begin.
Also, how much gear oil do I need to buy? Is 1 quart enough?
Any help would be greatly appreciated.
Thanks
Rob