Fuel pump not priming when dss inserted?

[Mikefl]

Ski died on the water from lose ground connection at the battery. I charged the battery overnight.
Ran for a bit then started missing at anything but idle.
Now when I insert the lanyard, she beeps, but I don’t hear the fuel pump priming.
I’ve checked fuses and removed/reseated all the connectors at the mpem module.

Anything else to check before replacing the fuel pump??

Thanks

 

[jhjesse]

Your pump is bad.

 

[Mikefl]

I think you’re right! I can’t find a pump that lists a 2002 GTXDI... the dealership on sells the complete module, 1000 bucks! Yikes

Your pump is bad.

 

[jhjesse]

Call Nick or Jess at westsidepowersports.com. They sell good used pumps and are stand up good guys. They are members here as well as on a couple of Facebook forums.

 

[HawkX66]

I had to disconnect my harness to fuel pump module connector and individually clean each terminal. They had just enough corrosion on each to be a problem. Before you go paying big bucks for a fuel pump, put 12vdc directly to yours.

 

[Mikefl]

I had to disconnect my harness to fuel pump module connector and individually clean each terminal. They had just enough corrosion on each to be a problem. Before you go paying big bucks for a fuel pump, put 12vdc directly to yours.

Excellent advice, I’ve ordered a pump already, but I’ll send it back if the electrical connection is the issue.
Thank you