Florida Classifieds

[racerxxx]

4 eye = foxbody?

Yep another sickness I have.

Mind you none of these are on the road.

79 Mustang with 93 LX body kit and quarterglass.

1984 20th Anniversay GT 350 Hatchback sunroof 5 speed
1984 20th Anniversay GT 350 Hatchback T-Top Auto CFI
1984 20th Anniversay GT 350 Convertible 5 speed car
1982 Mustang GT with the RARE auto trans less than 17K produced like that (first year back as a GT)
1985 Mustang GT T-Top (the one in the pic) was mine, sold it and bought it back 2 months later wrecked
1979 Mustang Cobra 5.0 Rolled bought as a parts car
1979 Mustang Pace Car--stripped--and I mean stripped got it for the VIN
1984 Mustang V6 T-Top bought as a parts car, drove it home
1982 Mercury Capri straight 6 parts car
1979 Mercury Capri RS Turbo sunroof car
Also have a 67 Mustang Fastback that I started when I was 14--24 years ago, guess I better get back to that one

These are car I currently have, if my dad moves I have to sell a lot of stuff. I can't fit them on 3/4's of an acre. Two of the 20th's are my Dads/mine. At one point just out of High school I had about 4 on the road at one time. They use to be my tow vehicles for my ski's--double place trailer and all. That blue 85 GT and my 79 were my best towing vehicles. My 79 ran 13.70's in the quarter on regular street tires and 89 octane, well before drag radials and I was too cheap to get slicks. I use to get used Pirelli's from the local BMW dealer weekly. I think the underside of my gas pedal was polished from the carpet. These are just my stuff, my father has this same illness and even more cars. We probably need to seek some type of therapy.

 

[racerxxx]

Fix
Or
Repair
Daily

I like


Found
On
Road
Dead

Sorry boys:

First
On
Race
Day

 

[anthonygrato]

Hey nammer
I'll send you the 2000 go get me that challenger and drop it off at my house.

I can get like 5 Gs for that tommarow.

 

[racerxxx]

i'm not a big fan of regular/single cabs, but yours looks real clean, i really like ur land though, looks awesome

I completely redid the body. Fenders, doors, cab corners, Dual cowl hood, I built a new 350, buddy did full 2-1/2 Stainless steel exhaust and stainless 40 series Flowmasters, shorty headers. The engine has about 300 miles tops on it. Drove to my dads farm one day, a steel brake line rotted out I back it in where you see it. Turned the key off and walked away, pops gave me a ride home and I dropped the insurance--DONE. I was tired of it, that was probably 5-6 years ago. Oh yeah, brand new bed liner and diamond plate work box too.

In the lower pic there is a guys 56 Chevy sitting there. Drove in from the paint shop with brand new Dayton wire wheels on it, had to have been 26-27 years ago, out to lunch! Stainless trim and chrome wasn't even put back on it yet.

 

[nammer]

anthony grato,

drop it off at ur house? u mean when u come down for our meet?

 

[nammer]

just texted the guy, it's sold

 

[anthonygrato]

I'm trying to get someone to drive down with me. My son is to busy playing video games 22 years old, I asked one of my friends but he wants to spend a week or so. I ain't got that kind of time. I would like to leave here on a Thursday and be back on Tuesday. If I do drive I have to bring back two skis for my boss and would like to garb one or two for myself. Lol
I'm still trying to figure out how to do this. Fly and try to rent or get someone to drive with me so we can drive straight threw.

Doesn't scmc live around my neck of the woods.

 

[racerxxx]

I'm trying to get someone to drive down with me. My son is to busy playing video games 22 years old, I asked one of my friends but he wants to spend a week or so. I ain't got that kind of time. I would like to leave here on a Thursday and be back on Tuesday. If I do drive I have to bring back two skis for my boss and would like to garb one or two for myself. Lol
I'm still trying to figure out how to do this. Fly and try to rent or get someone to drive with me so we can drive straight threw.

Doesn't scmc live around my neck of the woods.

I was contemplating going--out of the question now(Project HX funding). But I would have met you on 95 thrown a ski on your trailer and split the drive with you. From my door it was just over 15-16 hours---piece o cake. In the voice of Kramer--I'm Out! If you go and buy you gotta take pic's if your stacking skis to get them home!

I can picture this but replace the wood with a ski and a two place behind it with three on it.

 

[anthonygrato]

Omg. My buddy sent me a pic one day from a car where I grew up that looked like that lol.
I was think this out yesterday.

Picture this I got a ford king cab ranch 150. 6 ft bed with a tool box on it. If I drop the tool box. I figured I could one ski one the bed, Home Depot run some two x fours and build a double stand over the ski on the bed of the truck. Then with the double trailer I could build a single bunk above the two on the trailer. That six skis. Average ski 500 pounds that's 1500 on the truck and 1500 on the trailer. Lol I'm wondering how fast I can drive back.
The way down I would put the double trailer on the bed of the truck with one or two skis and strap the hell out of it so I can do about 75 with out worrying about the trailer swaying back and fort.

 

[Jetskigoodies]

Dont think so, with the 6 ft bed you need to drop the tailgate and then it will still hang over, and thats an x4 hull, so turning radius with a trailer on it will be nill. It may work but i think when you turn the tailgate will hit the noses of the machines on the trailer

 

[Jetskigoodies]

8 ft bed and your in business. Just buy that 6 place trailer in fl and youre good to go

 

[anthonygrato]

Dont think so, with the 6 ft bed you need to drop the tailgate and then it will still hang over, and thats an x4 hull, so turning radius with a trailer on it will be nill. It may work but i think when you turn the tailgate will hit the noses of the machines on the trailer

I'm pretty sure I drove my truck with the tailgate down before. The trailer has a long tung. I might have to loose the storage box on it though!

 

[racerxxx]

Here you go, there is a place that makes a lift but I can't find it. but here is the gist

 

[racerxxx]

Here is one of them--look at the 96 XP's!
http://www.jettrax.com/PWC-Lifts.htm

 

[anthonygrato]

Ok so only two on the bed. Three on the trailer? That's five! I think it would be funny as hell when the states pull me over and ask for the reg for everything tho!

Hey Dan did you get that box? I found a spring in the can carb cleaner. Your short one spring!

 

[anthonygrato]

Here is one of them--look at the 96 XP's!
http://www.jettrax.com/PWC-Lifts.htm

Why wouldn't you just buy a trailer. Lol

 

[racerxxx]

Ok so only two on the bed. Three on the trailer? That's five! I think it would be funny as hell when the states pull me over and ask for the reg for everything tho!

Hey Dan did you get that box? I found a spring in the can carb cleaner. Your short one spring!

You might be able to get a stand up in between the two on the truck.

No box yet, don't lose that spring, I might be needing it. It's gonna be nuts next week. USPS and UPS are going to be at the front door daily.

 

[anthonygrato]

Ok I have it. I think it's one of the throttle springs. It's in the organizer I have for the seadoo screws now


This is it

I just figured out what it's for. Low, high or idle adjustment spring.

 

[anthonygrato]

I know what that's like. I come home from work and there's boxes all over my front stoop. Nothing I ordered my wife and her Xmas shopping lol.

No box yet, don't lose that spring, I might be needing it. It's gonna be nuts next week. USPS and UPS are going to be at the front door daily.[/QUOTE]

 

[nammer]

if I can't give a hull away, where can i take it to dump it?

 

[racerxxx]

if I can't give a hull away, where can i take it to dump it?

Sound like it has a date with a sawzall. Guess the condo association would not lot a complete hull in the dumpster. You trashing the hull you just picked up

Sent from my SGH-T989 using Tapatalk 2

 

[nammer]

i mean they say no large items, but they are such assholes around here, I spent 2 hours moving stuff around so I could squeeze it into the garage, so that I wouldn't get another letter from the condos. If they see a jet ski hull in the dumpster, they'll prob know it was me I was outside taking parts off it at 2 am. yea, I'm basically taking what I can, spare nuts and bolts, oil and gas tanks, sponsoon, and gonna trash the hull. I was so disappointed, the hood that I picked out, instead of using the tool to remove the wires, they just cut the plastic, oh well, hopefully i can recoup something from the spare tanks, and I kinda like the green seat, it's kinda dry and cracking, but still looks decent

 

[nammer]

also, is a sawzall a better idea, or a cut saw like this http://www.harborfreight.com/5-double-cut-saw-68316-8065.html, like in general, I've never used either, but I just imagine a cut saw being more steady and stronger?

 

[racerxxx]

My favorite tool in my arsenal hands down is my sawzall. My wife would know that answer if asked. I love a project that involves it just used it yesterday to modify some skids in my storage shed!

Sent from my SGH-T989 using Tapatalk 2

 

[nammer]

cool, thanks dan, if nobody grabs this hull, i might have to add it to my tool inventory as well