Keller1490
New Member
I have read many threads, and have tried many things to stop this, but to no avail. I finally spaced my trim plate down 9/16 of an inch and I haven't smiled this much since I bought my boat. Reaches 60 mph way faster than ever before.....plains out way faster......and I can now ride through the roughest wake without a problem. I did run into a small problem when I was spacing the plate down. The left side bolt snapped off into the cast on the lower unit. I just took a 5/16 drill bit drilled a new hole and done. If you don't have a problem this entire project takes about 2 minutes and is so simple. I will definately post pictures this week. Ohh and this project will cost you less than $5.