dumb question......

[97 gti]

How do I get the plug wire boot off? Does it unscrew or do you pull the boot off?
Thanks

 

[LouDoo]

Cut the cable tie, and unscrew the boot.

Lou

 

[97 gti]

Thanks!!! :cheers:

 

[darnold]

hey Lou,

Do the plug wires also screw on/off at the coil?
Have you ever heard of using old school "tiger tail" wires with actual stranded copper conductor in jacket?
I used to run them on small block chrysler motors and even put a set on a 900 Kawasaki! Think they'd work well on a Sea Doo engine?

 

[LouDoo]

Plug Wires

At the front terminal box hold the plug wire still, and unscrew the plastic collar. There is another set of wires inside the terminal box that goes to the coil.

I don't know about using plug wires other than stock. I would stay with the stock wires. SeaDoo does a good job of providing max. performance.

Lou

 

[97 gti]

Do I just cut the wire and screw the cap back into the wire?

 

[LouDoo]

You only need to cut about 1/4" screw the spark plug boot back on and replace the cable tie.

Lou

 

[97 gti]

Thanks Lou, I'm an electrician and not use to just screwing in the wire, so the threads just twist into the wire and that your connection? Crazy

Brad