• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Drive, Neutral, Reverse Problem

Status
Not open for further replies.

95SPEEDSTER

New Member
The reverse gate off from the driver's side engine does not respond when I adjust the gear lever from drive to neutral and to reverse. Fortunately, it is stuck mostly in a drive position so I have been driving it. Any thoughts of where it would likely have come unlinked? Everything externally connected to the gate appears okay. Thank you!
 
Take the bolt out of the nozzle for the reverse system, move the lever and see if the cable moves. You might have a bad cable!
 
Status
Not open for further replies.
Back
Top