• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Custom bypass mod done w/ pix

Status
Not open for further replies.

HORNMAN

New Member
Hey all... thought I'd share w/ the folks here on the site my bypass/peehole mod. Oh, and a pic of my "area"......enjoy. MH
 

Attachments

  • VAR 126.jpg
    VAR 126.jpg
    274.3 KB · Views: 62
  • VAR 130.jpg
    VAR 130.jpg
    436.3 KB · Views: 59
  • VAR 128.jpg
    VAR 128.jpg
    487.4 KB · Views: 52
  • VAR 131.jpg
    VAR 131.jpg
    579 KB · Views: 56
I refuse to accept that you did the work, because your garage is WAY too clean. (j/k)

Thanks for the pics. :cheers:
 
I didnt think we were allowed to do that due to it being thats how its regulating how much water and how long it takes for the water to get in and out of the ski. Because I know with the merc 2.4 and 2.5 and Bridgeport I work on for some race boats I do. That when sometimes I come across a motor running too much water through it to quickly it wont keep it cool the water doesn't have enough time to have the heat exchange affect and I have to solve it by making it slow down the time it takes for the water to pass through the whole engine.


But BTW very cool and clean install.
 
I didnt think we were allowed to do that due to it being thats how its regulating how much water and how long it takes for the water to get in and out of the ski. Because I know with the merc 2.4 and 2.5 and Bridgeport I work on for some race boats I do. That when sometimes I come across a motor running too much water through it to quickly it wont keep it cool the water doesn't have enough time to have the heat exchange affect and I have to solve it by making it slow down the time it takes for the water to pass through the whole engine.


But BTW very cool and clean install.

Thanx there Mustang... In a nut shell, I took the stock after shut down drain line/bypass that used to exit at the exhaust tip, and made that my new pee hole, And ran it out the billet fitting on the side by the seat so I can monitor the flow ( visual). I then ran the old pee hole hose down to the exhaust tip area to drain the motor after shut down. Still have the 2 lines doing their thang, just moved em around a bit. I'm thinking that this should be ok. Oh,and plugged the stock pee hole out the back by the eye. MH
 
Reply

That is one really good man cave you have there.Except for the blue oval on the wall.:cheers:
 
Status
Not open for further replies.
Back
Top