Carbon Fiber Rotary Valve....

[NapaMatt]

hey..


Wondering if anyone has had any Luck with This...


Putting it on a 94 XP 650

Carbon Fiber Rotary Valve....



Also When Blocking Off Oil Injection System

I put a loop System in Filled it 90% Full Is that going to be Enough??

I was thinking of Just Changing That oil once a year... Is that going to be enough??

 

[voodoo]

The main reason folks defeat the OEM oiling is lack of knowledge in marine engines, in the joy of new ownership getting an old bottle of oil is the last thing on the mind of most folks so they go find something called marine oil without knowing any better it may mix and it may not, when it does not mix a gel forms and the pump draws this down to the nozzles and jamms them shut, you can flush the oiling system with kerosene and using premix 40-1 in 5 gallon loads watch for the tank to drop from the marks you made, when it is empty put in the proper type oil from a reputable place where you can buy it again and again, after the first bottle is used cut off the front and keep it in the glove box so you do not have to flush over and over every season.

 

[NapaMatt]

Thanks Voodoo

 

[seadooya]

wasting your money and rv cover, installing the carbon valve.

 

[b15philly]

What is the purpose of having the carbonfiber rotary valve, weight? Strength? I’m not asking to be a D$#@ I’m just curious.