Drdoolittle
New Member
I’m really good at researching and finding what I need usually so please forgive me if this has been covered many times over.
I bought a 1997 gtx the PO put an arieltek MPEM in it because the original was fried.
After installing it, it would crank but not start. So he sold it to me.
I put a brand new batter in it because the one it came with was undersized and seemed weak.
The ski fired right up with new battery! Hooray!
Got excited and went straight to the lake.
ski runs really well but revs are limited to 6300-6500 rpms I also suspect the timing may not be set Propety in the new MPEM
I cannot for the life of me find the instructions on how to program the arieltek MPEM with the button on the unit. I figured a couple searches would turn up a pdf or some write up, but striking out.
Anyway if anyone knows the procedure for setting the timing on these MPEM units and changing the rev limit I will be eternally appreciative!
Cheers!
I bought a 1997 gtx the PO put an arieltek MPEM in it because the original was fried.
After installing it, it would crank but not start. So he sold it to me.
I put a brand new batter in it because the one it came with was undersized and seemed weak.
The ski fired right up with new battery! Hooray!
Got excited and went straight to the lake.
ski runs really well but revs are limited to 6300-6500 rpms I also suspect the timing may not be set Propety in the new MPEM
I cannot for the life of me find the instructions on how to program the arieltek MPEM with the button on the unit. I figured a couple searches would turn up a pdf or some write up, but striking out.
Anyway if anyone knows the procedure for setting the timing on these MPEM units and changing the rev limit I will be eternally appreciative!
Cheers!
Last edited: