• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Alignment Questions - is it uncommon for things to be THIS out or did I do something wrong?

kyle h

New Member
Trying to do the alignment on my 95 HX and when I insert the rod, it is way off compared to the PTO. It’s also not well centered in the thru-hull, it’s not touching but it’s definitely not centered I’ve tried uninstalling and reinstalling the jet pump late and it really didn’t change much but I’m wondering is there something I messed up on my end with the tool or is it possible that these are actually just that far out?
 

Attachments

  • IMG_1120.jpeg
    IMG_1120.jpeg
    1.3 MB · Views: 4
  • IMG_1121.jpeg
    IMG_1121.jpeg
    957 KB · Views: 4
Trying to do the alignment on my 95 HX and when I insert the rod, it is way off compared to the PTO. It’s also not well centered in the thru-hull, it’s not touching but it’s definitely not centered I’ve tried uninstalling and reinstalling the jet pump late and it really didn’t change much but I’m wondering is there something I messed up on my end with the tool or is it possible that these are actually just that far out?
are you using the alignment tool?
 
Back
Top