I'm adding a Tach to my 2000 GS and have found all the info I need on wiring. However, in my search, I have read alot about corrosion in gauges. I bought the gauge used and it appears that there may have been moisture in it and I want to clean the inside of the lens and reseal if possible. My problem is that I can't seem to get it apart and don't want to distroy the gauge.
I took the four screws and backing plate off
then loosened the three screws under the backing plate(thinking they held it together)
tried breaking apart by hand, but no success
Is there a trick to this or is it even possible?
Thanks for any info!
I took the four screws and backing plate off
then loosened the three screws under the backing plate(thinking they held it together)
tried breaking apart by hand, but no success
Is there a trick to this or is it even possible?
Thanks for any info!