97 challenger 1800 radio and 12 v socket

[Scott Campbell]

Can anyone point me in the right direction? I have no power at the red and black lines going into the radio nor on the white and black lines going to the 12 v socket mounted near the radio in the glove box. I pulled the lid off the MPEM and everything seems to be plugged in and all fuses seem good. Is there anything else I can try?

Scott

 

[RFoster130]

Check around the battery. Make sure there are no extra wires that need connected. Did it use to work and it quit? Might be easier to run new wires.

 

[Cid6.7]

My 12v plug stopped working but I found a 10amp fuse blown under the drivers container..Not sure if thats the problem however..But my radio never went out just the plug..Check ur fuses