• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

93XP Project

Status
Not open for further replies.
Toolanddiemaker

Toolanddiemaker

Active Member
Well thanks to this forum I'm becoming a Seadoo addict! A few months back I traded an old glock pistol I had collecting dust in my safe for a 93 xp that had seen better days but was in need of some love. https://vimeo.com/116931272
I got this on trade knowing it needed engine work that said I'm bored out of my mind in the winter and wanted hours of garage time to fill! Compression was terrible about 130 110 so I got started tearing into it
162.jpg

Well top end is shot and I found the gremlin looks like broken oil lines to the rv cover that explains a lot! Bottom end will get a new crank I found shrapnel mixed in with the oil and the bearings sounded horrible .
163.jpg



Sent from my iPhone using Tapatalk
 
Next I thought I would give the bilge a good cleaning
164.jpg

And on to removing all the decals, what a pita took me about 4 hours with a heat gun and some serious patients!
165.jpg

Wanted to give it a good buff and polish job with my Christmas present a new duel tools polisher works pretty good.
166.jpg

After a full day of polishing!
167.jpg
168.jpg



Sent from my iPhone using Tapatalk
 
Got a some goodies from wcss a new seat cover and turf mats.
169.jpg

Seat cover wasn't to bad I had a buddy help me out the worst part was removing all they old staples but I had a little helper!
170.jpg

Finished product!
171.jpg

Blacktip mats installed I filled all the rivit holes with a good marine silicone.
172.jpg



Sent from my iPhone using Tapatalk
 
I thought I would give the carbs a full rebuild and cleaning so I bought an ultrasonic cleaner that will also work well on cleaning my guns plus I just wanted an excuse to go to cabelas!
173.jpg

Cleaner worked great my carbs were looking ruff!
174.jpg

Pop off pressure was dead on and I found a neat tool my buddy let me borrow for pressure testing its called a kuhlman gauge he works for a gas company they use them to check gas lines anyway used it to test the pump pressure
175.jpg



Sent from my iPhone using Tapatalk
 
Big thanks to minnetonka4me for all the parts I needed! That nasty pink grab rail got tossed and replaced with a nice used black one.
178.jpg

I also painted the vents and hood black I ended up going with a single gauge hood I really like the look so if anyone needs a realy nice 3 gauge green hood let me know.
179.jpg
180.jpg



Sent from my iPhone using Tapatalk
 
If you find you need anything for them I have 2 93xps at the shop that are going to be parts machines and have not been touched yet. Parts would be real cheap and if your close than you could just pick them up.


Nice work by the way. The seat turned out nice.
 
Jetskigoodies said:
If you find you need anything for them I have 2 93xps at the shop that are going to be parts machines and have not been touched yet. Parts would be real cheap and if your close than you could just pick them up.


Nice work by the way. The seat turned out nice.
Click to expand...

Hey thanks! I will keep that in mind.


Sent from my iPhone using Tapatalk
 
270.jpg


This was it, I found it on cl this year. I sold it probably 6-7 years ago. The graphics held up nice
 
Last edited by a moderator:
Jetskigoodies said:
270.jpg


This was it, I found it on cl this year. I sold it probably 6-7 years ago. The graphics help up nice
Click to expand...

Yea that does look good! know that I can see it on a live ski I think I like the razor graphics better than the banshee, pwc graphics has a really good selection to choose from.


Sent from my iPhone using Tapatalk
 
I would suggest you ask that the seadoo logo on the bottom looked like the stock one though with the seadog font and the circle in the middle, I did not like the sea-doo and font he used on the bottom. He will change stuff out though.

He does have alot of choices.

He is currently making replicas of the 96xp graphics for us. We sent in tracings of the originals off of a mint xp we came across. They should be done soon.

215.jpg


214.jpg


219.jpg
 
Last edited by a moderator:
Cool thanks for the heads up I will deff have him do that with the font.

That's awesome you can keep those 96xp graphics alive and in future production,from all my searches there about they only place that does oem replicas.

I'm thinking next winter I will be doing a yellow 95xp800 my buddy's dad has one that is having issues and he doesn't want to put any more $ into it so I might buy it, anyway I know it needs decals there pretty ruff so at least I have options..

This 93 resto is like practice or a prerequisite to doing an 800xp hopefully I have it all down by then lol! Besides the speedster this is realy the first ski I have worked on, I parted a few out to fund this and future projects but technically this will be my first rideable ski. Hope to start a little collection should be fun!


Sent from my iPhone using Tapatalk
 
Any opinions on this brp emblem I bought it on eBay thinking it was the same size as stock but it's actually quite larger looks a little awkward must be for the newer models.
182.jpg



Sent from my iPhone using Tapatalk
 
It looks great. Your little assistant will love ripping around the lake with you on it. My 4 year old assistant just asked me this morning when we can take the yellow seadoo to the lake.
 
mikidymac said:
It looks great. Your little assistant will love ripping around the lake with you on it. My 4 year old assistant just asked me this morning when we can take the yellow seadoo to the lake.
Click to expand...

Thanks! Yep my sons the same age and loves the lake also he's actually the reason I bought my speedster can't wait till this cold weather goes away!


Sent from my iPhone using Tapatalk
 
Yep, they are very fun at this age and smarter than you think. Out of the blue on the way to school he asked, "Dad... where is the engine for the yellow seadoo". I replied, "In the attic, still have not finished it". His response, "You need to get that done, I really like the yellow one!".
 
mikidymac said:
Yep, they are very fun at this age and smarter than you think. Out of the blue on the way to school he asked, "Dad... where is the engine for the yellow seadoo". I replied, "In the attic, still have not finished it". His response, "You need to get that done, I really like the yellow one!".
Click to expand...

LOL! That's great at least you know he has good taste in skis! My son is already claiming my 93 as his own.
 
This weekend I plan on putting some black sponsons to replace the worn out green ones. Hopefully putting the new ones on will go easy taking them off was a pita!
209.jpg
210.jpg
211.jpg

I will post some pics when I'm finished, I still have a lot to accomplish I'm currently replacing fuel lines,fuel bowl filter, and selector valve. I'm thinking I will just send the top end out to full boar and rebuild the motor myself with a new crank,seals and gaskets I had a blast rebuilding one of my speedster motors and it turned out to be a great runner. So hopefully next week I can order some graphics and have some more pics!


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.

Similar threads

M
Aftermarket Speedometer Issue
Replies
3
Views
129
MarshallDillon
M
B
97 Challenger Starting Issue and Mag Question
Replies
1
Views
170
rusty nail
rusty nail
J
2002 GTX 1503 4-Tec compression issue.
Replies
6
Views
297
dcm0123
D
S
1999 SeaDoo GTX Limited Oil/Carb Problem
Replies
2
Views
326
Grim
Grim
AJF22
My GS motor is a no go, need some advice
Replies
5
Views
355
AJF22
AJF22
Back
Top