2008 Seadoo Challenger SE Windshield Skirt

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

heatckr

New Member
I'm wondering if anyone has had an issue snapping in their vinyl windshield skirt.

It is the piece of vinyl that snaps in underneath the windshield to block wind coming through the pass-through section.

Either the snaps on the boat are wrong or its the wrong flap.

Thanks,
 
I have a 08 180 challenger and had the same trouble it was hard to get snaped in but it should get easier to snap in the more it gets used. Also I had to adjust the snaps on the windshiled they were in the wrong spot.
 
Thanks for the reply.

The boat snaps are INCHES off to the point where I can't get them snapped in.

The techs at Delta Power Equipment in Seaforth have been phenomenal at working to correct the issue. They are having someone redo the snaps on the boat itself. The boat is still under warranty so it won't cost me a thing.
 
Status
Not open for further replies.
Back
Top