• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2000 seadoo GTX DI millenium 951

A guy brought me this ski to replace the engine. Someone had already done a sbt replacement on it and didnt hook up some of the hoses and some incorrectly. I have searched as much as I can to reference were a hose goes and can not seem to find out were the clear hose coming off the noise silencer in rear bottom of hull goes to. Hose part 39 would be the victom in question. Does anyone have the same ski that could post photos? IMG_20250905_141248.png
 

Attachments

  • 20250831_175445.jpg
    20250831_175445.jpg
    500.2 KB · Views: 6
  • 20250831_175644.jpg
    20250831_175644.jpg
    349.8 KB · Views: 6
  • 20250831_175505.jpg
    20250831_175505.jpg
    680.7 KB · Views: 6
I gave it a look. I'm not sure if (air) is the only thing that flows through that line but there is a connection on the throttle bodies with a hose like that. Check the throttle bodies and the air box for connection point. Just make positively certain that the air feed line for the compressor (large black hose) is coming from the airbox. That one will ruin your day quickly. You'll likely have it by then but I'll give it a look tomorrow with a flashlight and a mirror.

2002 RX DI Hoses and Engine  (15).JPEG
 
Last edited:
Back
Top