Did a top end, rebuilt the carbs(Back to OEM), new fuel selector, new fuel lines, new fuel filter Oring, cut back spark plug wires, new spark plugs, fresh oil and premix 50:1 with oiler for break in. Cranked right up after about 6 attempts. Starts every time and revs great. Problem
Is I have exhaust leak where the two big pipes meet. I cleaned all the mating surfaces and sprayed copper sealant on the metal gasket. Should I have done something else in addition to seal those pipes or do I just not have them butted up against each other correctly? Thanks for any suggestions.
Is I have exhaust leak where the two big pipes meet. I cleaned all the mating surfaces and sprayed copper sealant on the metal gasket. Should I have done something else in addition to seal those pipes or do I just not have them butted up against each other correctly? Thanks for any suggestions.