2000 challenger 2000

[andyak]

Can someone tell me where the screw on fuel filter is
supposed to be located. I can only locate an inline filter
on this rebuilt engine and am wondering if they didn't install
one.

Thanks

Andy

 

[seadooya]

Andy, not sure the type of engine you have in your boat. Believe in that year, they had the Mercury, twin 787's, and if its the 14.5ft boat, 2-717's. If you've located an inline fuel lfilter, then there is no other one(screw type).:cheers:

My "post" only coincides with the rotax motor set-up. The 14.5ft boat, should have 2-screw type filters.

 

[andyak]

Merc 210 carb

I've got the merc. Kinda small inline white
plastic filter. Wouldn't it be better to route to a larger
screw on water trapping filter?

What does the outboard version of the merc
use for fuel filter(s)?

Thanks

andy

 

[rookie101]

Unfortunately the only filter on the carbureted 210 is the small screw on in-line filter. All the fuel injected models use a spin-on fuel/water separator, but not the carbureted version. If it bothers you, you may be able to find an aftermarket set-up for a water separator from any of the large marine supply houses.

Aaron:cheers:

 

[andyak]

Fuel float question

Thanks for the help guys.

I took out fuel tube cause fuel always says empty

Bottom filter piece was off of tube and at bottom of tank
I managed to get that back and it is ok shape. M

but can't find float at all. M

where can I order a new float quick?

I can't find it at online parts dealers
like babbits.

Thanks in advance

Andy

 

[rookie101]

Check the parts link in the upper right hand corner of this page. It shows all the available parts, as well as an exploded view.

Here's the link. http://partsfinder.onlinemicrofiche.com/seadooforums/Seadoo_oem/Seadoo_JB.asp?Type=13&A=38&B=3



Aaron:cheers:

 

[andyak]

no float at that link

Like I said - I can't find fuel float there...

Help please??

Best,

Andy