'06 GTX Std...what plugs and what are the tool kit pieces?

[FRD1952]

I would like to know what spark plug and gap for the '06 GTX (std), and what are the standard pieces that come in the little tool kit strapped under the seat? Mine is missing a few tools it looks like.

Thanks,
F

 

[aklim]

I would use the NGK equivalent as those seem to work well. Stock gap would be found in your manual

As to the tool parts: http://partsfinder.onlinemicrofiche.com/4tec/Seadoo_oem/Seadoo_PWC.asp?Type=13&A=137&B=18

Pliers, screwdriver shaft, driver handle, wrench and spark plug tool

 

[Dennis]

(3) NGK DCPR8E .034 in. gap :cheers:

 

[FRD1952]

Ahhh..now I know what is missing from the kit. Any idea on what number NGK plug for this unit? Thanks !

 

[FRD1952]

OK...now I see the plug and the gap...thanks loads guys. Is there a recommended time frame or number of hours after which you should change plugs? While the unit is a 2006, there are only about 40 hours on it, and 35 of those were this past summer.
Thanks,
F

 

[Seadoobuddy]

Use them until it runs bad, hard to start or looks crappy
Always keep a new set of plugs with you esp if you ride a long ways from the ramp. Pre-gapping them helps.

 

[FRD1952]

ok, makes sense to me...I asked about which ones so I could get some to put into those slots/holes in the plastic tray underneath the seat. Will get em, gap em, and put into those slots so they will be ready. Thanks.
F