ecm

  1. W

    2006 Seadoo Challenger 180 Harness Help

    Had a short in my harness and some blue smoke got out. :( Having a hard time to find the replacement connector or harness. Any help is appreciated.
  2. MrDuVwah

    1997 Seadoo Bombardier GSI ECM/MPEM failure - need part!!

    Howdy folks, I have a 1997 Sea-Doo Bombardier GSI that has recently been giving me some pain. After a lot of trial and error, the issue has been narrowed down to a dead ECM/MPEM Problem is, I can’t find a replacement one anywhere! Apparently this specific model is extremely hard to find and I’m...
  3. G

    07 islandia won’t start after battery died

    Hey guys! 3 days ago I came back after a great day on the water. I was so tired that I didn’t realize I left the DESS key on the post and the battery switch ON. I realized next day so I put the key away and plug my 2amp battery tender. After 12hrs Electronics work so I assume I was ready to...
  4. Asrich

    ECM Swap

    I have a 2008 GTX 155 that has an intermittent no power/no start issue. I put the key on the post and nothing happens. Main relay does not switch on. Battery is good. Wait about 10 minutes and the ski starts, but will cut out after a bit And will not power up for about 10 minutes. I can put the...
  5. anthonymsaad

    Challenger 210 SE Sound system/Amplifier causing issues with ECMs

    For those that recall many months ago, I had the boat with an ECM that wouldn't power down and kept resetting the odometer to the last saved value. This post is long, I'm sorry. Just really confused as to what is going on. Apparently no one at BRP, among their experts, ever saw an ECM unable to...
  6. R

    Mpi-3 + Buds read problem in 2013 rxpx

    Solved SOLVED. please delete.
  7. K

    2005 3D RFI 1 cylinder not firing, Testing with Candoo Pro. Faulty ECM???

    trying to track down a fault on my 3D RFI. only runs on 1 cylinder constantly. Connected candoo pro and when individually activating coils with plugs removed and earthed can only get 1 to spark. Tested resistance in wiring between coil and ECM and both test perfect (0 ohms), but only 1 will fire...
  8. K

    2005 3D RFI no spark on 1 cylinder testing with CanDoo Pro ECM???

    trying to track down a fault on my 3D RFI. only runs on 1 cylinder constantly. Connected candoo pro and when individually activating coils with plugs removed and earthed can only get 1 to spark. Tested resistance in wiring between coil and ECM and both test perfect (0 ohms), but only 1 will fire...
  9. B

    2008 180 Challenger ECM Fuse Blows

    Nothing worse than an electrical problem that does not occur all the time. Periodically when I try to start my 180 Challenger, the 5 amp ECM fuse blows. I have had to be towed twice now. When the fuse blows, any new fuses I put in, blow as well. Sometimes, it starts just fine. I took it...
  10. M

    RXT instrument cluster & relay always on

    My RXT had been sitting for a while and the battery was dead. I put a charger on it while it was still connected. Looking back that was probably a bad thing to do :( So I did disconnected the battery and finished charging it. Now whenever I connect the battery I can hear a relay click on and...
  11. C

    Seadoo ECM

    Bought a 2006 seadoo wake 155hp theft recovery seadoo. Look good but have the mpem and ECM removed. Bought a used mpem. Can I use a ECM out off a 130 hp or a 215hp. Any help would be appreciated
  12. M

    I need an ECM for a 2000 Islandia

    I need an ECM for a 20oo Islandia mercury 240 , mine is dumping a ton of fuel in the starboard side of engine. I have replaced head temp sensor and throttle position sensor. It runs very rough and eats gas. Also does anyone know if when I get a ECM does it need to be programed when I get it( by...
  13. T

    ECM 1998 Challenger

    I am having trouble finding an ECM for a 1998 Challenger 1800.
Back
Top