WTB 95 XP cosmetic parts

[Kal Brigger]

I'm looking for new or "like-new" parts:

foot pads - all (mine are violet and no longer flat, wouldn't mind different color)

handle bar plastic cover (color not an issue, going to paint anyway)

handlebar starter controls assembly and throttle assembly (mine work, just in bad shape)

grips (not 100% sure of color yet, waiting to see what seat cover we end up with)

I prefer PayPal.
I'm just trying to dress up this XP to be a little more presentable.
If you don't have these parts but know where I can find them, please feel free to let me know!
I've already tried eBay without much luck.

Thanks ahead of time.

 

[racerxxx]

As far as teh mats go, they will all look like bacon. Everyone uses Hydro Turf or Black Tip mats. The site here has a store www.pwcmuscle.com use promo code HYDRO15 to get 15% off Hydro turf mats. many selections.

I have a green handle bar cover in good shape if you're going to paint it. I could let it go for $30 shipped

It's just like this one, but way cheaper.

http://www.ebay.com/itm/95-SP-SEADO...ash=item2ca9ad327b:g:TAgAAOSwr7ZW5Frm&vxp=mtr

Or Black tip makes a neoprene cover for them like this one-----not sure if this is a good price or not, you can do the research

http://www.ebay.com/itm/Sea-Doo-PWC...ash=item1e702f7901:g:NzIAAOxy-WxTFhTJ&vxp=mtr


You can buy new OEM control pieces from OSDparts.com

Grips, you can buy stock grips or most guys run ODI grips, I think 120mm lock on's.

Welcome to the best forum for you and your Seadoo!!!!!!!!!!!!!!!!!

 

[mcycleski]

I have a handfull of used OEM grips and throttles also have a billet block off that goes on the OEM pad so you run a finger throttle and stock par pad possible the start/stop housing Pm if still looking

 

[Kal Brigger]

Thanks for the replies!!
-I'm not sure if I did the thumbs up thing correctly-

I'm going to PM both of you soon

 

[Kal Brigger]

Well, this forum is working!
I've found handlebar cover and foot pads and possibly controls.
I'm still not 100% on color scheme yet but it seems like the faded violet is on its way out.
So, now I'm looking for black (most likely, per approval from the wife) bumpers and rear handle- unless they can be painted with decent amount of success.

I'm having the seat recovered but waiting on color approval and availability. I was thinking black (for a white and black theme) but I'm worried about it getting hot in the sun. Any ideas?

 

[racerxxx]

Thank you sir for the PayPal! The bar pad will ship tomorrow.

 

[Kal Brigger]

Just received my handle bar cover from RacerXXX- Better than expected!!
Fast shipping, great prices- I really appreciate it !!

Still trying to figure out the thumbs up thing...

 

[racerxxx]

Sweet! I think I was more nervous that it wouldn't meet your expectations, glad it did.

 

[Kal Brigger]

Wanted to thank Patriceg007 (I hope that's correct spelling) for the foot pads, grips, controls and nose trim!

We MIGHT have a color scheme figured out for this- original, with the exception of the seat which will be white since upholstery guy doesn't have any yellow.
I wanted to replace the violet with black and the yellow with a blue similar to the graphics but after seeing so many threads on here about restoring back to factory appearance, me and my better half have come to an agreement.
I'm not going to do a full restore on it, just make it look more presentable.

As soon as I get pics loaded on to the PC, I'm going to start my own thread. I'd appreciate any help answering the many questions I will have when the time comes.

Thanks for the help so far!

 

[Kal Brigger]

So to keep the mechanical/cosmetic parts wanted separated, I'll ask on this thread for ideas on the rear handle.
Our stock handle is very rough condition. Very soft, sticky and pitted.
Sanding and painting is out of the question.
So I'm looking for either a really good deal on a replacement or ideas on how to fix this one.
I thought about asking my upholstery guy about wrapping it.