Trail Tech gauge installed pics?

[Thumper3322]

Hey guys,

I just picked up the hour/tach gauge and thought the wire would be running out the back of it, which with the adhesive included I figured would seal it and not show any holes.

Any how... Anyone have pics of their gauge installed?

Oh... And the reset button doesn't seem to do anything. I'm guessing it has to be hooked up first?

thanks

 

[Matt Braley]

It's gonna read double when you first fire it up. You will have to hit that reset button to set it for the Rotax. I have installed a few now but I drilled a little wire hole under it and sealed with silicone. Careful not to use too many wraps on the plug wire. I was on the phone with the Tiny Tach guy and he said to take one or two wraps on each wire because they fire together anyway and you will get a more even, consistent signal. I'm guessing the same is true for the Trail Tech but I've rigged them many ways and they have always worked.

 

[Spimothy Leary]

handlebar mount

dash mount

 

[Thumper3322]

Thx for the pic. Like it beside the post. Looks good. Damn the thing is small.

Thx for the info Matt. I read about that, will have to change it once I get it set up.