Throttle controls

[Gary Reed]

I have at seadoo speedster with twin throttles.
The outside throttle stays put when coasting but the inside one has to be held to stop it drifting back.
The outside one has a screw to tighten or loosen it where is the adjustment for the inside one next to the forward & reverse lever?

Regards Gary ( Spain )

 

[SPEEDSTER95]

Hi Gary

Just had a look in my manual and here is what it says.

" To adjust shifter friction,turn set screw that is on the same side as the shifter lever"
" To adjust starboard lever (outer lever ) turn set screw on the same side as it's lever"
" To adjust port lever ( inner lever) turn set screw on center of pivot point of the lever"

Hope that helps
Greg