stripped nut on nozzle now

[Pointhunter75]

Putting my nozzle back on and the last bolt goes in a ways then starts just turning and won't go any farther. Do the nylon nuts have a metal insert or what? Can I get that out and just use a regular nut?

 

[LouDoo]

Your talking about part no. 51 the caged nut, I don't see why a regular nut wouldn't work, it's a metric thread and be sure to get a stainless steel nut. I've had good luck finding stainless steel hardware at ACE Hardware.

http://partsfinder.onlinemicrofiche...=308&b=17&c=0&d=-PROPULSION-SYSTEM---EXTERNAL

Lou

 

[Pointhunter75]

That's it loud. Nut housing.be nice if they told the size. Probably gonna have to remove the pump again to get that stripped one out.

 

[LouDoo]

It's M80 to match no. 20 M80x70 bolt, take the bolt with you.

http://partsfinder.onlinemicrofiche...=308&b=17&c=0&d=-PROPULSION-SYSTEM---EXTERNAL

Lou

 

[Pointhunter75]

Will do thanks