So the 1996 GTX starts up and runs now. This ski has a battery on/off switch. I use the switch when I am finished. When I go out to the ski and turn the battery switch to "on" the ski does not start right up. I am wondering if the delay is the system takes some time to power up.
Further checking and when I remove the DESS KEY and reinstall, the ski starts right up. I get no beeps but the beeper is functional. I am seeing the gauge lights (tach and speedo) flashing but I don't know what the light mean.
I checked the holder relay, the MPEM and replaced the DC CDI with used. The no spark issue was the Trigger and I also found one of the mag coils was open.
The hold relay is a concern but it has worked consistently every time I test it.
Input would be appreciated.
Further checking and when I remove the DESS KEY and reinstall, the ski starts right up. I get no beeps but the beeper is functional. I am seeing the gauge lights (tach and speedo) flashing but I don't know what the light mean.

I checked the holder relay, the MPEM and replaced the DC CDI with used. The no spark issue was the Trigger and I also found one of the mag coils was open.
The hold relay is a concern but it has worked consistently every time I test it.
Input would be appreciated.
Last edited by a moderator: