• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

start question

Status
Not open for further replies.
start and lanyard sw test o.k. all grounds are good, all connections are tight. I get nothing when I press the start button. I jump the solenoid and the starter cranks. Any ideas what is wrong?
This is a 94 seadoo sp
 
The 94 will not have DESS. No beeps when you attach the lanyard is normal for that ski.
 
Check the connector on the solenoid, do you get voltage to it? If so the solenoid is probably bad
 
Do you have a wiring diagram ?? I am chasing a gremlin on my 96 GTX but it has DESS. When you say you jumped the solenoid, did you apply voltage to the small wire or did you jump across the two large wires?
 
sounds good. My 96 has the DESS key. I got some weird stuff going on. Good Luck !!
 
Status
Not open for further replies.
Back
Top