seadoo won't rev

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

garrett

New Member
my seadoo 3d won't rev up after it warms up. Runs fine cold, could it be overheating? There is no alarm going off or limp mode light coming on.
 
front plug is fouled,check your oilinjection setting its getting to much oil,when motor is cold it runs on both cyclinders untill engine is warm,once motor warms up it drops on cyclinder at idle ,suppose to pick it up whe rpm gets above 2300rpm ir plug got fouled during 1 cyclinder mode ,one plug fouled wont rev.adjust your oil injecter and dont idle it much
 
Status
Not open for further replies.
Back
Top