Water sports
Active Member
Well i worked on the boat today, and replaced all the water and fuel hoses, which certainly was well worth doing as I found one of the water hoses was slightly blocked and o e of the fuel hose was on the manifold which was nearly burnt through so great outcome today.
However some questions,
1- Can i use fuel hose as water hole ?
2-Do you think it is necessary to do the oil pipes, i am going to replace the oil filters (I noticed the oil piping runs under the engines and are wondering how i will undo and tighten the hose clips.
3-When installing the temperature sensors, do I need to use some sort of Loctite on these or some sort of sealant ?
4-Jet pumps, do you think i should drain the oil and replace the oil on both jet pumps (Do you have a diagram on how to carry this work out)
5- in regards to the buzzer and key unit when placing this on i only get a faint couple of beeps, but other times this is loud we have talked about this before do you think I should replace the buzzer unit.
However some questions,
1- Can i use fuel hose as water hole ?
2-Do you think it is necessary to do the oil pipes, i am going to replace the oil filters (I noticed the oil piping runs under the engines and are wondering how i will undo and tighten the hose clips.
3-When installing the temperature sensors, do I need to use some sort of Loctite on these or some sort of sealant ?
4-Jet pumps, do you think i should drain the oil and replace the oil on both jet pumps (Do you have a diagram on how to carry this work out)
5- in regards to the buzzer and key unit when placing this on i only get a faint couple of beeps, but other times this is loud we have talked about this before do you think I should replace the buzzer unit.