Seadoo 2004 GTX 4tec

[Thomas Mashig]

One of my 2004 GTX 4tec Seadoo waverunners is throwing code p1514. Not sure what that means. Now when I started I had to spray starting fluid in one cylinder to get it going and then would start with no problems. Once I got it in water it ran well at times but crappy at other times like 1 cylinder was missing. Any help? I'm on vacation in New Hampshire and would love to get it going.

 

[Rikky001]

This is not a critical code. Exterior temperature sensor high voltage.
I am not familiar with this type, but from the manual:

Possible cause:
Damaged sensor, damaged circuit wires, damaged connector or damaged MPEM output pins.
Service action:
Check for 200 to 24000 ohms between pins 1 and 9 of the instrument cluster harness connector. Connect or disable exterior air temperature sensor in setting page.

 

[Thomas Mashig]

Thank you so much. I will check to see is I can disable in settings or maybe swap out sensor if I can get. Know a good website for parts?
Thanks so much for your help. I install home theaters and TV's, audio and home control if you ever need advice. thomasmashig@gmail.com

thank you again your info was very helpfull.

Tom