Reverse Cable lever

[kcrollins1]

I have a 95 Seadoo Speedster. I need to replace the reverse cable levers. Since the 95 models are obsolete, does anyone know if I can use a new model and can I get them from the parts store?

Does anyone know where I can pick up a new fuel baffle?


Keith

 

[parrothd]

I think they still sell the cable, do a search on pwctoday or greenhulk on how to repair/fix the baffle, it's either the fuse or the fuel float..

 

[RFoster130]

You can still find the cable. I think a member here (Seadooya) has a link somewhere that he posted for a place that sold them.

 

[SeadooBOB Square Pants]

I replaced my cables on my 96 speedster last season. I would remove the cable VERY VERY carefully and measure it and I will tell you if it is the same. They only sell the right cable for the 1996 now but i works you just have to feed the cable a little differently.

 

[seadooya]

his cable splits off to both pumps, unlike the newer style 2-motor boats, where there is a stationed arm, between the reverse gates. Guess you can always go that route, if needed.

Look up Control Cables, in Sante Fe Springs CA, ask for Vic, and tell him your yr/mdl boat.

 

[dwhee87]

I've had some new cable levers made by a local machine shop for my 95 speedster. They are installed, but not yet "field tested". I've had several people on here indicate they'd be interested in getting some once I verify they work correctly.

[/IMG]

This what you're looking for?

I hope to get out this weekend to test.

 

[dwhee87]

I tried the cable levers for the 96 (thicker, molded plastic) and they did not open up the reverse thrust gate far enough, causing cavitation.