RAVE adjustments???

[WonderDawg]

I just wanted to know about adjusting the red button on top of the captured black cap that sits on top of the motor/RAVE. Should it be turned all the way in? Part of the way in, flush with the top of the black cap or all the way out???


Regards,


W. D. :lol::lol:

 

[Dr Honda]

Generally, on an engine with a few miles on it... I recommend turning them in the entire way. But, they are adjustable for the way you ride. As you turning hem out... the RAVE's will open sooner. When they open, you loose torque, but gain upper RPM's. So, depending on your weight, and the way you have the ski set up... you want them to open just as the torque peak is achieved.

 

[WonderDawg]

The reason that I am asking this question is becasue my ski tends to be a little sluggish in the lower RPM range. Say between 0 mph and 20 mph. So I was wondering if I turned the little red caps out a full turn or two what sort of difference that would make in getting up out of the hole.

Regards,

W. D.

 

[Dr Honda]

I would turn them in. You want the valve to hold shut until you start to get speed and develop RPM's.