Dadasaurus
Active Member
Hi all, we have been getting to use the boat a lot this year and so I thought I'd better grease the pto zerk on each PTO. I only put 2 pumps in and grease came out of the boot. Funny thing was that it came out on both boots from the same spot - looking towards the back of the boat the grease came out of the boot on the left side about halfway down basically centered with the drive shaft. It was like there was a pin hole in each boot on the left side. Just trying to determine if I over greased it and ruined a seal, or if the boots are just warn out, but seems strange to be coming out at the same spot on both boots. Thank you!