• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Proper placement of main in/out cooling line on 787 engine

Status
Not open for further replies.

laxexquis

New Member
Hello,

I had to undo the main in and out cooling lines on my 787 motor, now I forget which goes on which. Can someone describe to me which out of the two goes on the two parts of the side of the engine?

Thanks for your help,

John
 
Looking from the back of the ski, the cooling line in the middle of the hull (from the pump) goes to the left hand side of the head. The line on the left, goes to the right side of the head. The pump is always your feed, and the outlet is just that. Again, this is if you were standing behind the ski looking. The lines cross to help make it easier. Or, the line with the T fitting going to your waterbox goes to the opposite side of the exhaust sys and carbs, which comes from the pump.
 
Looking from the back of the ski, the cooling line in the middle of the hull (from the pump) goes to the left hand side of the head. The line on the left, goes to the right side of the head. The pump is always your feed, and the outlet is just that. Again, this is if you were standing behind the ski looking. The lines cross to help make it easier. Or, the line with the T fitting going to your waterbox goes to the opposite side of the exhaust sys and carbs, which comes from the pump.

Okay, thanks.

Just to be sure, looking from the back of the ski the line with the T in it should be on the left of the head?

John
 
Status
Not open for further replies.
Back
Top