• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Possible bad magnet?????

Status
Not open for further replies.

mjm716

New Member
i have a 94 xp 657 that i finally got running, the way i did this was by removing the woodruff key and turning the flywheel 90 degrees and she started right up and runs fine, so i did the math, 4 magnets devided by 360 degrees gives me the same position every 90 degrees, why would the jet ski run at 1 90 degree point and not at the one with the woodruff key, has anyone ever had this happen, could a magnet go bad and not have enough power to trigger the stator. also my 12v low light is on.
 
Status
Not open for further replies.
Back
Top