plumbing fuel lines 96 gti

[thornhill16]

I finally decided it was time to pull the tank and change the lines , im sure i connected everything right reserve from the tank to reserve on the fuel selector , on to on , out going to fuel filter , fuel filter going to carbs , return line running back to fuel pick up , i added a in line filter by the carbs as well which i can see fuel pulsing when i turn over but its not enough to keep engine going , i put two gallons of fuel in the tank , im thinking i just didnt put enough to fill the lines , i ran battery low yesterday trying to get fuel flowing , im gonna get 2 more gallons today , but i wanted some opinions just in case i did something wrong thanks

 

[LouDoo]

Here's a Tech Article on the subject.

http://www.seadooforum.com/showthre...el-Delivery-Problems-low-revs-bogging-surging

One thing to check if you only have 2 gal. of gas in the tank, be sure the fuel selector valve is in the reserve position. Also check the fuel line connections against the diagram in the above thread. I am assuming you cleaned the fuel selector valve and cleaned the carb. filters.

Lou

 

[Minnetonka4me]

The oring in the fuel water seperator has to be good so air doesnt leak in...that usually the prob...lol unless you have the switch to ON like Lou said.